Sodastream Complete

Description

New Sodastream unit or wanting a spare cylinder to make sure you don’t run out?

Each cylinder provides up to 60 Liters of sparkling water, depending on sparkling water maker and level of carbonation.

Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing on the top and pulling it away from the body of the Sparkling Water Maker.
Set the back cover aside.
Gently tip the Sparkling Water Maker forward and insert the cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
Screw the cylinder counter-clockwise while applying gentle pressure until it is firmly held in place. Do not use tools and make sure the cylinder is secured in its place.
Reinstall the back cover by fitting the upright tab at the bottom into the rear slot at the base of the Sparkling Water Maker. Then push the cover into place onto the back of the Sparkling Water Maker.

There is two different types of cylinder so please make sure you order the correct one for your machine.

***** Collection only *****

Please contact us for more information on 01380 722689